Learning Outcomes

Course Introduction

Introduction to Design of Steel Structures

Steel as a Structural Material

Limit State Design

Introduction to Connections

Lesson Summary

In this module, you will be introduced to the importance of steel in construction industries, as well as the philosophy of Limit State design, and more.

Introduction to Bolt Connections

Design of Ordinary Black Bolts

Design of Ordinary Black Bolts - Examples

Design of High Strength Friction Grip (HSFG) Bolts

This module illustrates the design methodology of ordinary black bolts and high strength friction grip bolts; examples are provided.

Introduction to Weld Connection

Design of Fillet Welds

Design of Butt Welds

Design of Plug and Slot Weld

In this module, Weld Connections, you will learn about the types of welds and their design methodology; examples are provided to help demonstrate.

Eccentric Loading in Plane of Bolted Joint – Concepts

Eccentric Loading in Plane of Bolted Joint – Design

Eccentric Loading in Plane of Welded Joint

Eccentric Load Lying Perpendicular to Plane of Bolt Joint - Design

Eccentric Load Lying Perpendicular to Plane of Bolt Joint - Example

Eccentric Load Lying Perpendicular to Plane of Welded Joint

This module, Eccentric Connections, discusses the design of eccentric connections due to plane and perpendicular loading on bolt and welded joints; with examples to illustrate.

Overview of Tension Members and Net Area

Calculation of Net Area in Tension Members

Design Strength of Tension Members

Strength Calculation of Tension Members

Strength of Tension Members with Weld Connection

In this module, Tension Members, you will learn how to calculate the design strength and net area of tension members that are welded or bolted to a gusset plate; examples are provided to demonstrate such calculation.

Steps in Designing Tension Members

Design Calculation for Tension Members

Design of Gusset Plate

Lug Angles

Design of Splices in Tension Members

This module, Design of Tension Members and Connectors, discusses the steps to designing tension members, gusset plates, lug angles, and splices; with an example to illustrate these designs.

Advanced Diploma in Design of Steel Structures - First Assessment

This is the first assessment in the Advanced Diploma in Design of Steel Structures course. This module will review your learning and understanding of the first half of this course content.

Overview of Compression Members

Design Strength of Compression Members

Compressive Strength of Members

Compressive Strength of Single Angle Struts

Compressive Strength of Double Angles

In this module, Compression Members, you will learn about how to calculate the compressive strength of members, including columns, single angle and double angle struts. Examples are provided for each case to illustrate each of these types of calculations.

Design of Compression Members

Design of Built-up Compression Members

Concepts of Lacing Systems

Design of Lacing Systems

Connection Design of Lacing Systems

Design of Double Lacing Systems

This module, Design of Compression Members and Lacing Systems, discusses the step-by-step process of designing compression members and lacing systems; examples are provided to demonstrate those designs.

Design of Batten Plates

Design of Batten Plates Using Bolt Connection

Design of Batten Plates Using Weld Connection

Design of Column Splices

Design of Column Splices Due to Shear

This module, Design of Batten Plates and Column Splices, discusses the design of batten plates and column splices, with examples to illustrate the designs.

Introduction to Flexural Members

Failure Modes of Flexural Members

Introduction to Laterally Supported Beams

Design of Laterally Supported Beams

Laterally Supported Beams with High Shear

In this module, Laterally Supported Beams, you will learn about the types of beams and their various failure modes, as well as the design methodologies of laterally supported beams under high and low shear. Examples are provided to illustrate the design methodologies.

Introduction to Laterally Unsupported Beams

Strength Calculation of Laterally Unsupported Beams

Design of Laterally Unsupported Beams

Calculation of Plastic Section Modulus

In this module, Laterally Unsupported Beams, you will examine the design steps of laterally unsupported beams, including how to calculate their design bending strength and plastic section modulus; worked-out examples are provided to demonstrate the designs and calculations.

Introduction to Design of Purlins

Design of Purlins - Example

Introduction to Gantry Girders

Design of Gantry Girder

Worked out Example for Gantry Girder

This module, Purlins and Gantry Girders, explains the steps in designing purlins and gantry girders, with worked-out examples to illustrate how these designs are done.

Introduction to the Design of Slab Base

Design of Slab Base

Eccentrically Loaded Base Plate

Introduction to the Design of Gusset Base

Design of Gusset Base - Examples

This module, Column Bases, discusses the working operation of the two types of column bases, including the steps in designing them; worked-out examples are also presented to demonstrate those designs.

Advanced Diploma in Design of Steel Structures - Second Assessment

This is the second assessment in the Advanced Diploma in Design of Steel Structures course. This module will review your learning and understanding of the second half of this course content.

Advanced Diploma in Design of Steel Structures - Course Assessment

Learn how to economically design steel structures, tension members and welded connections from this course.

Advanced Diploma in Design of Steel Structures

This Design of Steel Structures free online course will teach you about design procedures for steel structure members and connections. This course will broaden your knowledge of how to design suitable bolt and welded connections for steel structures. You will learn a step-by-step process of designing tension and compression members, including lacing systems and batten plates. You will also learn how to design beams, bases and more.

In this free online Advanced Diploma Course on Design of Steel Structures, you will be exposed to the steps in designing suitable members and connections for steel structures, with examples to demonstrate such designs. This online training course begins with explaining the importance of steel as a structural material and how to design the various types of bolt and weld connections. You will then learn about the process of designing eccentric connections with load lying on the bolt or weld connection.
This free course on Structural Steel Design will then proceed to teach you the design procedures for tension and compression members. You will then learn about the steps in designing lacing systems and batten plates. You will also be learning how to design laterally supported beams and unsupported beams. Lastly, you will learn how to design a gantry girder for an overhead crane system as well as suitable column based steel structures.
Furthermore, the modules of this course provide worked-out examples and diagrams to illustrate the steps in designing the various members and connections of steel structures, in order to guide structural designers in designing suitable and economical steel structures. So, if you are interested in civil engineering or you are a structural designer, engineer, or one who wants to get advanced insights on how steel structural members and connections are designed, this course is for you. Start this training course today, to get profound understanding on how to economically design steel structures members and connections without compromising the quality of the structure.

University of Sheffield Ends 11-Year Partnership with FutureLearn

[2025] 300+ Free Digital Marketing Certificates & Badges

The Day MOOCs Truly Died: Coursera’s Preview Mode Kills Free Learning

5 Best Free Raspberry Pi Courses for Beginners in 2025

Black Friday 2024: 50+ Online Learning Deals

Exploring edX’s “Final” Tax Returns: Revenue Surges, Losses Mount, and Contributions Decline

Duolingo’s Restaurant Side Business Tops $1.3M

SEO Content Strategy Demystified: Coursera, MasterClass, and edX

Coursera’s New Deal with Google Could Cost the Company Millions

Why Duolingo is Worth More Than Coursera and Udemy Combined

70+ FutureLearn Courses with Free Certificates

A Decade of MOOCs: A Review of MOOC Stats and Trends in 2021

6,000+ Online Courses from California Community Colleges: A New Search Tool by Class Central

6 Best Site Reliability Engineering Courses to Take in 2025

Where are UAE residential prices and rents heading in 2026?

DeepLearning.AI to Cross $100M in Sales on Coursera

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.